 |
A new generation of tanking membrane
for showers
Many years of development have
resulted in a superb new waterproof tanking system that reduces the
technical workload during installation, addressing and simplifying
subtle issues such as corners and awkward joints.
|
Flexible waterproofing offers lifetime assurance
Buildings may look solid but they breathe. This is one of the reasons why
even waterproof tile adhesives and grout will eventually form small
sometimes invisible cracks that are the root of leaks and damp penetration.
The solution is a 'cold applied' flexible membrane that absorbs the minute
movement whilst presenting an impermeable barrier under the tile through
which water simply cannot pass. So confident are the manufacturers that you
get a Lifetime Guarantee with the product.
|
Pre-formed corners simplify tricky areas
No matter how accomplished you are with the application of a waterproof
membrane, it can still prove to be fiddly when it comes to internal and
external corners. With the Waterguard system this sometimes onerous task has
been anticipated with the inclusion of pre-formed internal and external
corner sections - simplifying installation and saving time.
Additional components are available should you require extra. |
|
No time lost waiting for Waterguard to cure
Waterguard not only offers a rapid method of installing a guaranteed
waterproofing system, it can also be tiled on as soon as it has been
installed. There is no time lost hanging about waiting for the product to
cure, no extra days work having to revisit for the next phase of install,
you simply move straight on towards a finished job. |
Waterguard is compatible with
electric under tile heating
Arguably, there is nothing
nicer than a warm tiled floor to wall on. Not only does it
change the ambience of a cold tiled surface, it also
improves drying time which reduces the likelihood of damp
odours and the risks associated with a wet floor. This can
be achieved fairly cheaply with
electric
under tile heating kits but must be installed before you
tile the floor. When used with a tanking system it is
essential to ensure the heat generated by the heating
element does not melt the membrane.
Electric
under tile heating is compatible with Waterguard providing you do not exceed a heat
output of 100 watts/m2.
Our under tile heating kits
are fully compatible with the Waterguard tanking system.
|
 |
|
| |
|
|
Waterguard Tanking Kits
|
|
|
| Product Code |
Kit contents |
£ ex VAT |
£ Inc VAT |
|
WG5
|
5m2 of
Waterguard tank membrane (Roll 1m wide x 5m long) |
160.27 |
|
|
|
500ml of BAL
Primer |
|
|
|
|
15m of
jointing tape |
|
|
|
|
4 x internal
corners |
|
|
|
|
1 x external
corner |
|
|
|
|
Butyl sealant |
|
|
|
WG10
|
10m2 of
Waterguard tank membrane (Roll 1m wide x 10m long) |
216.48 |
|
|
|
500ml of BAL
Primer |
|
|
|
|
20m of
jointing tape |
|
|
|
|
4 x internal
corners |
|
|
|
|
1 x external
corner |
|
|
|
|
Butyl sealant |
|
|
|
Additional Waterguard
components if required
|
|
|
| WGJT10 |
10m jointing
tape |
40.32 |
|
| WGIPC |
Pre-formed
Internal corner |
7.43 |
|
| WGEPC |
Pre-formed
External corner |
7.43 |
|
| |
|
|
|
|
|
 |
|
Been offered a
Price Match? |
